Nanotong Ruiya Electromechanical Equipment Co Ltd
Full solution for decorative melamine impregnation line, melamine lamination short cycle press, door skin press, high pressure lamination press and press plate manufacturing. in CCL and FR4, high end
Add to Cart
4feet, 5feet, 6feet, 7feet, 8feet two steps melamine paper impregnation line, widely for the production of Melamine Impregnated Paper for MDF lamination , MDF flooring , MDF door skin, Engineered Veneer Recon composite , Formica and Compact HPL purpose.
1, Basic Data
| Paper width | max1350 mm, 1250mm |
| Mechanical Speed | 0‐ 40 m/min |
| Operating Speed | 15‐20m/min @80gsm & 100% glue pick‐up; Operating Speed subjects to resin and paper property. |
| Operating Level | 1380mm 1250mm or customized operating level |
2, Horizontal Paper Unwinder with Auto Splicer Knob
| Rollers Max width | 1500 mm |
| Nozzle width | 1500 mm |
| Paper Loading max Ø | Ø1200 mm bearing 1.2Tons paper weight |
| Paper Loading max Weight | 1200 kg |
| Air Expanding Core dimension Ø | Ø76mm |
3, Resin and Paper Sorts
| Resin Sorts | MF/UF |
| Resin Solids Contents Property | ≥55% |
| Resin Content by Curtain roller control | 60‐200%,±2% |
| Glue Volatility | 4.5 ‐ 7.5% |
4, Consumption figures and specifications
| Drive side/direction | Left or Right seen from feeding direction, customized |
| Operator side/direction | Left or Right seen from feeding direction, customized |
| Nos of Oven Chambers | Nos of 6segments, 3.75m oven |
| Nos. of Temperature control | 5pcs |
| Max Circulating Air | Approx. 12000 m³/hr. adjustable |
| Max. exhausting gas | approx11500 m³/hr. adjustable |
| Average Exhausting gas | approx5000 m³/hr. |
| Heating Sources | Thermal oil liquid |
| Drying temperature of chambers | 50 – 180 ºC adjustable |
| Power supply | 3PH AC220/380/415V – 50/60HZ – 2ph AC 220V |
| Total installation power | Approx. 55KW |
| Power efficiency | 50‐70%, operating power capacity as 25~30kw |
| Compressed air | approx. 1.5 m³/min ‐ 0.6mpa |
|
Cooling water circulation |
Approx. 3 m³/h, 0.1~0.3Mpa at 10º C, final web temperature 20º C, Requirement Cooling Tower by buyer |
| Doctor Rollers φ | φ290mm |
| Doctor Rollers linear tolerance | 0.002mm |
| Brinell Hardness | 510‐570 HB |
| Doctor Rollers tolerance | 0.05μm |
| Glue pick‐up tolerance | ±3% |
| Temperature controlling accuracy | ±1 ºC |
| Cutting accuracy | ±1mm |
| Noise level in1 meter distance | less than 80 dB |
Remark:
Vendor reserves the right to carry out any change concerning design and construction
of machines, as machines are steadily to improve their performance.